The Sequoia 7” Path Light comes complete with a fully adjustable reflector top. It is available in a standard 22” fixed stem or a 17” to 28” adjustable stem.

The Sequoia fixture is available in the following finishes: machined copper, brass, or brass with black Cerakote®.

Machined copper and brass offer a beautiful living finish that weathers over time to a unique patina.

Brass fixtures with black Cerakote® H Series ceramic coating offer superior corrosion resistance, durability, chemical resistance, and thermal stability.

To clean the fixture, periodically wipe it down with a mild soap and water.

Made in America. ETL Listed in US and Canada.

SOFT SOIL APPLICATIONS: INSTALLING THE GROUND STAKE & FIXTURE

1. Connect the power cable from the fixture body to the landscape cable.

2. Lay the power cable into the slotted relief on the stake.

3. Press the fixture and stake into the ground.

4. Use a level to ensure the top of the stake is level with the ground.

HARD SOIL APPLICATIONS: INSTALLING THE GROUND STAKE & FIXTURE

1. Unscrew the fixture body from the stake.

2. Dig a hole approximately 4” wide by 10” deep and gently tap the stake into the ground with a rubber mallet.

3. Use a level to ensure the top of the stake is level with the ground.

4. Reinstall the fixture body onto the stake and lay the power cable into the slotted relief on the stake.

5. Connect the power cable from the fixture body to the landscape cable.

ADJUSTING THE FIXTURE

1. Turn the threaded ring counter clockwise to loosen the lid.

2. Find the right light pattern by moving the lid up and down on the stem.

3. Turn the threaded ring clockwise to lock the lid into the preferred position.

4. For adjustable stem models, adjust the stem length by loosening the set screw, adjusting the stem height, and tightening the set screw to hold it in place.

INSTALLING THE LAMP

1. Loosen the threaded jam nut toward the stem.

2. Unscrew the lid from the stem.

3. Install the Beacon G4 Bi-Pin into the socket.

4. Screw the lid onto the stem.

5. Adjust the threaded ring until you achieve the light pattern you want.

All low voltage outdoor lights must be installed with a 12V Low Voltage Transformer and connections between lights must be secured using Grease Filled Wire Nuts (WN12) waterproof connectors.

All of our products are backed by our manufacturer's money-back guarantee, ensuring you receive a quality product free from defects. We Provide the best quality products and services. Feel free to contact us for any help or advice with this product!

Reason to Buy from Us:

1. No surprises or hidden fees.
2. Safe payments via PayPal.
3. 30 Day Money Back Guarantee.
4. Real helpful humans on our support help desk!
5. Tracking number for every order