The Acadia Directional Light works with MR11 lamps. It features an adjustable glare shield and the Brilliance Metal Works signature adjustment system, which allows for 22 points of articulation of the knuckle in 10 degree increments.

The Acadia fixture is available in the following finishes: machined copper, brass, or brass with black Cerakote®.

Machined copper and brass offer a beautiful living finish that weathers over time to a unique patina.

Brass fixtures with black Cerakote® H Series ceramic coating offer superior corrosion resistance, durability, chemical resistance, and thermal stability.

To clean the fixture, periodically wipe it down with a mild soap and water.

Made in America. ETL Listed in US and Canada.

SOFT SOIL APPLICATIONS: INSTALLING THE GROUND STAKE & FIXTURE

1. Connect the power cable from the fixture body to the landscape cable.

2. Lay the power cable into the slotted relief on the stake.

3. Press the fixture and stake into the ground.

4. Use a level to ensure the top of the stake is level with the ground..

HARD SOIL APPLICATIONS: INSTALLING THE GROUND STAKE & FIXTURE

1. Unscrew the fixture body from the stake.

2. Dig a hole approximately 4” wide by 10” deep and gently tap the stake into the ground with a rubber mallet.

3. Use a level to ensure the top of the stake is level with the ground.

4. Reinstall the fixture body onto the stake and lay the power cable into the slotted relief on the stake.

5. Connect the power cable from the fixture body to the landscape cable.

ADJUSTING THE FIXTURE IN GENERAL AND FOR DARK SKY ORDINANCE APPLICATIONS

1. Turn the thumbnut counter-clockwise to loosen the knuckle.

2. Rotate the fixture vertically to the preferred position.

3. Turn the thumbnut clockwise to hold it in the preferred position.

INSTALLING THE LAMP

1. Loosen the thumbscrew on the adjustable shield and remove it from the fixture body.

2. Unscrew the fixture body from the base.

3. Install the lamp in the socket with the tension spring behind the body of the lamp.

4. After lamp is installed, compress the tension spring as you thread the metal body into the base.

5. Return the adjustable shield to the preferred position and tighten the thumbscrew to hold it in place.

All low voltage outdoor lights must be installed with a 12V Low Voltage Transformer and connections between lights must be secured using Grease Filled Wire Nuts (WN12) waterproof connectors.

All of our products are backed by our manufacturer's money-back guarantee, ensuring you receive a quality product free from defects. We Provide the best quality products and services. Feel free to contact us for any help or advice with this product!

Reason to Buy from Us:

1. No surprises or hidden fees.
2. Safe payments via PayPal.
3. 30 Day Money Back Guarantee.
4. Real helpful humans on our support help desk!
5. Tracking number for every order