SLN 10 Pack Solderless Strip to Wire Connectors for 6x12mm Strip Light Neon
SLN 10 Pack Solderless Strip to Wire Connectors for 6x12mm Strip Light Neon
SLN 10 Pack Solderless Strip to Wire Connectors for 6x12mm Strip Light Neon
SLN 10 Pack Solderless Strip to Wire Connectors for 6x12mm Strip Light Neon
SLN 10 Pack Solderless Strip to Wire Connectors for 6x12mm Strip Light Neon
SLN 10 Pack Solderless Strip to Wire Connectors for 6x12mm Strip Light Neon
SLN 10 Pack Solderless Strip to Wire Connectors for 6x12mm Strip Light Neon
SLN 10 Pack Solderless Strip to Wire Connectors for 6x12mm Strip Light Neon
SLN 10 Pack Solderless Strip to Wire Connectors for 6x12mm Strip Light Neon

Description

The 10 pack SLN Strip Light Neon Solderless Connector has a 2-pin connector for a 6x12mm wide single-color Neon Strip Light. This can withstand heat resistance up to 100 degrees Celsius.

Specs & Features:

  • Connector Width: for 6x12 mm led neon strip
  • Cable length: About 7 inches / 180mm
  • Compatibility: LED Neon Strips Light
  • Waterproofing: Indoor Only

Installation Instructions:
1. Ensure your section of the LED light strip has two contacts (+ and -) and the contacts are both clean
2. Open the white clasp of the connector
3. Insert the LED light strip into the clasp, under the prongs - making sure to match the + and - on the strip to the + and - on the clasp
4. Close the clasp
5. Gently pull on the LED light strip to confirm you've made a solid connection
6. Done

SLN 10 Pack Solderless Strip to Wire Connectors for 6x12mm Strip Light Neon

$57.00

Subscribe to get 10% off on your first order!

• Connector Width: for 6x12 mm led neon strip
• Cable length: About 7 inches / 180mm
• Compatibility: SMD 2835 LED Neon Strips Light
• Waterproofing: Indoor Only
• Package: 10 Pcs Total

Installation Guide Spec Sheet

Description

The 10 pack SLN Strip Light Neon Solderless Connector has a 2-pin connector for a 6x12mm wide single-color Neon Strip Light. This can withstand heat resistance up to 100 degrees Celsius.

Specs & Features:

  • Connector Width: for 6x12 mm led neon strip
  • Cable length: About 7 inches / 180mm
  • Compatibility: LED Neon Strips Light
  • Waterproofing: Indoor Only

Installation Instructions:
1. Ensure your section of the LED light strip has two contacts (+ and -) and the contacts are both clean
2. Open the white clasp of the connector
3. Insert the LED light strip into the clasp, under the prongs - making sure to match the + and - on the strip to the + and - on the clasp
4. Close the clasp
5. Gently pull on the LED light strip to confirm you've made a solid connection
6. Done

×

Net Orders Checkout

Item Price Qty Total
Subtotal $0.00
Shipping
Total

Shipping Address

Shipping Methods