Brilliance Redwood Low Voltage G4 Brass Rotatable Path Light Outdoor Landscape Lighting
Brilliance Redwood Low Voltage G4 Brass Rotatable Path Light Outdoor Landscape Lighting
Brilliance Redwood Low Voltage G4 Brass Rotatable Path Light Outdoor Landscape Lighting
Brilliance Redwood Low Voltage G4 Brass Rotatable Path Light Outdoor Landscape Lighting
Brilliance Redwood Low Voltage G4 Brass Rotatable Path Light Outdoor Landscape Lighting
Brilliance Redwood Low Voltage G4 Brass Rotatable Path Light Outdoor Landscape Lighting
Brilliance Redwood Low Voltage G4 Brass Rotatable Path Light Outdoor Landscape Lighting

Description

The Redwood Path Light comes complete with a frosted glass window that can rotate 360° and locks in with a set screw. The Redwood is available with a G4 Rectangular Wafer.

The Redwood fixture is available in the following finishes: machined copper, brass, or brass with black Cerakote®.

Machined copper and brass offer a beautiful living finish that weathers over time to a unique patina.

Brass fixtures with black Cerakote® H Series ceramic coating offer superior corrosion resistance, durability, chemical resistance, and thermal stability.

To clean the fixture, periodically wipe it down with a mild soap and water.

Made in America.

SOFT SOIL APPLICATIONS: INSTALLING THE GROUND STAKE & FIXTURE

  1. Connect the power cable from the fixture body to the landscape cable.

  2. Lay the power cable into the slotted relief on the stake.

  3. Press the fixture and stake into the ground.

  4. Use a level to ensure the top of the stake is level with the ground.

HARD SOIL APPLICATIONS: INSTALLING THE GROUND STAKE & FIXTURE

  1. Unscrew the fixture body from the stake.

  2. Dig a hole approximately 4” wide by 10” deep and gently tap the stake into the ground with a rubber mallet.

  3. Use a level to ensure the top of the stake is level with the ground.

  4. Reinstall the fixture body onto the stake and lay the power cable into the slotted relief on the stake.

  5. Connect the power cable from the fixture body to the landscape cable.

INSTALLING THE LAMP

  1. Loosen the set screw for the lens cover.

  2. Remove the brass lens cover.

  3. Install the G4 Wafer into the socket.

  4. Place the lens cover back on the fixture body.

  5. When using a Micro G4 or Beacon G4, you can adjust the window to direct light where you want it.

IMPORTANT: Replace the o-rings if necessary.

All low voltage outdoor lights must be installed with a 12V Low Voltage Transformer and connections between lights must be secured using Grease Filled Wire Nuts (WN12) waterproof connectors.

All of our products are backed by our manufacturer's money-back guarantee, ensuring you receive a quality product free from defects. We Provide the best quality products and services. Feel free to contact us for any help or advice with this product!

Reason to Buy from Us:

  1. No surprises or hidden fees.
  2. Safe payments via PayPal.
  3. 30 Day Money Back Guarantee.
  4. Real helpful humans on our support help desk!
  5. Tracking number for every order

      

Brilliance Redwood Low Voltage G4 Brass Rotatable Path Light Outdoor Landscape Lighting

$362.99

Subscribe to get 10% off on your first order!

• 100% Full Cast Brass Body
• Brass, Copper, Brass w/ Black Cerakote® or Full Black Finishes
• Heat Resistant Clear Lens That Sheds Water
• ABS Mounting Stake, LightingShrink Professional Crimp, and Heat Shrink Cable Connector
• G4 12V LED Bulb (Sold Separately)
** Low Voltage Transformer Required! **

Installation Guide Spec Sheet

Description

The Redwood Path Light comes complete with a frosted glass window that can rotate 360° and locks in with a set screw. The Redwood is available with a G4 Rectangular Wafer.

The Redwood fixture is available in the following finishes: machined copper, brass, or brass with black Cerakote®.

Machined copper and brass offer a beautiful living finish that weathers over time to a unique patina.

Brass fixtures with black Cerakote® H Series ceramic coating offer superior corrosion resistance, durability, chemical resistance, and thermal stability.

To clean the fixture, periodically wipe it down with a mild soap and water.

Made in America.

SOFT SOIL APPLICATIONS: INSTALLING THE GROUND STAKE & FIXTURE

  1. Connect the power cable from the fixture body to the landscape cable.

  2. Lay the power cable into the slotted relief on the stake.

  3. Press the fixture and stake into the ground.

  4. Use a level to ensure the top of the stake is level with the ground.

HARD SOIL APPLICATIONS: INSTALLING THE GROUND STAKE & FIXTURE

  1. Unscrew the fixture body from the stake.

  2. Dig a hole approximately 4” wide by 10” deep and gently tap the stake into the ground with a rubber mallet.

  3. Use a level to ensure the top of the stake is level with the ground.

  4. Reinstall the fixture body onto the stake and lay the power cable into the slotted relief on the stake.

  5. Connect the power cable from the fixture body to the landscape cable.

INSTALLING THE LAMP

  1. Loosen the set screw for the lens cover.

  2. Remove the brass lens cover.

  3. Install the G4 Wafer into the socket.

  4. Place the lens cover back on the fixture body.

  5. When using a Micro G4 or Beacon G4, you can adjust the window to direct light where you want it.

IMPORTANT: Replace the o-rings if necessary.

All low voltage outdoor lights must be installed with a 12V Low Voltage Transformer and connections between lights must be secured using Grease Filled Wire Nuts (WN12) waterproof connectors.

All of our products are backed by our manufacturer's money-back guarantee, ensuring you receive a quality product free from defects. We Provide the best quality products and services. Feel free to contact us for any help or advice with this product!

Reason to Buy from Us:

  1. No surprises or hidden fees.
  2. Safe payments via PayPal.
  3. 30 Day Money Back Guarantee.
  4. Real helpful humans on our support help desk!
  5. Tracking number for every order

      

×

Net Orders Checkout

Item Price Qty Total
Subtotal $0.00
Shipping
Total

Shipping Address

Shipping Methods